Tag Archives: Bathrobes

Déjà vu

After completing my “Classic French Jacket” and its coordinating sheath dress, I wanted something easy – and relatively quick – for my next project. I didn’t think it was going to be another bathrobe, but that’s what it has turned out to be, to my great surprise.

Because we had such a chilly Spring, I was wearing my newly constructed Winter bathrobe into June. But, suddenly, Summer arrived in the middle of that month, with its humidity and often beastly temperatures. It was then I pulled out my old, lightweight Summer robe – you know, the one with the missing button – and the small tear – and the tea stain which somehow became a permanent fixture. Not such a pretty sight.  Having become used to my new Winter robe which makes me happy whenever I put it on, I decided maybe it was time to replace my Summer robe, too.

I already had a three-yard length of “water-color-designed cotton lawn” from Britex Fabrics.

I forgot to get a photo of the fabric before I cut into it.  This is a partial view of the back of the robe.  I purchased this Italian-produced, fine cotton during one of the online sales at Britex Fabrics in San Francisco.

At 56” wide, I thought it would be enough to make a robe, using the same wonderful pattern I had used for my Winter robe.

This pattern from 1959 is so well engineered, with subtle details which give it a polished appearance.

My only reservation was that the fabric makes quite a statement. I wondered if perhaps it was going to be too, too much in an ankle length robe. Truthfully, though, how many people see me in my bathrobe? I figured I’d go for it.

Once again, laying out the pattern was quite the task, done entirely on the floor. Although the pattern matching didn’t have to be quite as precise as working with an orderly plaid, I did have to pay attention to the large squares and where they would end up in relation to each other and in relation to the dimensions of the front and back of the robe.

The front of the robe, sans its sash.

And a back view. Without lining up the “watercolor blocks” in some relation to each other, the effect would really have been chaos!

The fineness of the fabric is apparent if you look closely at the collar, where there is some fade-through of the design. (The interfacing is attached to the under section of the collar.)

I did not have enough fabric to “match” the designs on the sleeves, but I rather like them not exactly alike.  Also, I shortened the sleeves to below elbow length, more appropriate for a Summer robe, but also necessary to save fabric!

I used flat felled seams for the body of the robe.

After just barely managing to get the two fronts, one back, the sleeves and collar and front facings placed on the fabric, I knew I was not going to have enough fabric left to match the pockets to their underlaying design. I did, however, have two fabric blocks featuring those quirky little birds, enough to make two pockets. The birds could even face each other.

But I knew they would look a little “lost in space” unless I set them off somehow. That’s when I went to my tried and true solution for all kinds of sewing fixes – piping! Yellow seemed to delineate the pockets the best – beating out green, red, pink and purple, all of which I “auditioned.”

I quite like those little birds, looking cheery and chirpy on the front of my robe.

 

Ready for its debut!

The fabric is so lovely, almost diaphanous in its effect. And that bold, colorful pattern which had given me pause? It has an exotic flair to it, quite acceptable for a summer robe. I just hope it doesn’t panic the cat.

31 Comments

Filed under Bathrobes, Mid-Century style, piping, Uncategorized, vintage Vogue patterns from the 1950s

How Exciting Can a Bathrobe Be?

Or – Who Is That Woman in our Kitchen? After well over twenty years of wearing the same ratty old bathrobe (well, it wasn’t old or ratty when I first started wearing it, but the years took their toll on it), I now have a new one. I will admit to being almost unrecognizable in the mornings and evenings now, as I float through the house in my new attire – leading my husband to wonder if a new woman is now making the morning coffee.

I found vintage Viyella wool/cotton fabric on eBay last year. Although only 35” wide, the length available was 5 ½ yards which I determined should be enough for a ankle-length bathrobe. Viyella is a lovely blend of 40% wool and 60% cotton, and it is machine washable. It is lightweight, but warm, very soft, and such a pleasure with which to sew.

The paper labels were still attached to this length of Viyella.

From four bathrobe patterns in my collection, I chose this one for its classic styling, including a wrap front and shawl collar:

I made a muslin (toile) to check on the fit, and then I used the muslin as my pattern, marking the seam lines onto the Viyella using waxed tracing paper.

Because of the narrow width of the fabric, and the need to be precise with matching the plaid in the fabric, I laid out my muslin pattern singly. I had to do this on the floor because of the great length with which I was working. Matching the plaid, although thankfully a very even plaid, took a lot of time – and time on my knees! Ouch!

One of the pattern pieces close up.

And here is one piece with markings transferred onto it. I am used to sewing on a marked seam line, and prefer this method rather than using set seam allowances.

I am always impressed by some of the subtleties in these vintage patterns. This one includes bust darts that descend from the shoulder seams. Also, two small back darts make the fit across the shoulders so much more precise. Both are clearly shown in the diagrams on the reverse side of the pattern envelope.

Click on the picture to see the details.

Also detailed on the pattern layout diagram is the slight flare to the front edges of the robe. I didn’t really pick this up in the muslin I made, but once I was working on the robe, especially in this plaid, which makes a flared seam more apparent, I was very aware of it. It is such a nice detail, making the wrapped front closure more graceful in appearance and offering just a bit more coverage than a straight edge would do.

You can follow the flare of the front edge by looking at the descension of the plaid.

A detail of the back neck edge.

I did make a few changes to the pattern. First of all, I used a fusible interfacing instead of a “sew-in” one (typically indicated on vintage patterns form the 1950s, as this one is.) I don’t use fusible interfacings very often, but I decided this would be a good application for such. I used “Heat n Bond” woven interfacing, ordered from fabric.com, and so far, I am very pleaded with its performance. Secondly, I added another pocket, as I like two pockets on my bathrobes. I also had to lower the placement of the pocket from the lines indicated on the pattern, which were inexplicably high!

Two pockets!

A third change was the elimination of the wide self-binding on the pockets and the cuffs of the sleeves. Instead I used a 1¼ inch self-binding which I cut on the bias. With all that plaid, I thought a little bit of variety would add a nice touch.

A minor fourth change was the addition of fabric belt loops, as opposed to the thread loops called for in the pattern instructions.

 

 

 

 

 

 

 

 

 

I love the classic styling of this robe. The fact that I was able to use such a glorious fabric for it (contemporary with the age of the pattern, by the way!) makes it even more lovely to wear. Not only am I – yes – very excited (!) about wearing this new bathrobe, I also find it to be an unexpected, but wonderful change of persona for my early morning and late evening hours.

 

38 Comments

Filed under Bathrobes, Mid-Century style, Uncategorized, Vintage fabric, vintage Vogue patterns from the 1950s