Tag Archives: fashion sewing

May 27, 2015 · 2:28 pm

Mellow Yellow

How did I go from this . . .

A collared overblouse.

to this?

It all started about a year ago when I saw this fabric – called Devonshire Cream Geometric Cotton Eyelet Batiste on the Britex Fabrics website. I sent off for a swatch and then ordered enough for a “blouse” although at the time, I wasn’t so sure what kind of a blouse it would be. I knew I would want sleeves in it. While the body of the blouse would need to be lined, the sleeves could be unlined to show off the gauzy design in the eyelet.

Inspiration finally struck a short few weeks ago when I got a small catalogue from J McLaughlin clothing company. Pictured in it was this “Lotus Blouse”:

As soon as I saw the “square” design in the fabric, I thought of my eyelet – and then it did not take long for me to decide to make my own version of that blouse. The construction details? Well, I knew I would have to make those up as I went along. I started with the pattern shown above, a classic early 1960s short overblouse that zipped up the back. What could be better? It really didn’t matter that the neckline would be changed, sleeves added, inches added to the length – the basics were there and so I made a muslin/toile.

I cut an underlining for the body of the blouse from a lightweight linen/cotton blend that I always keep on hand. I marked the seam lines of that underlining with waxed tracing paper and then used it as my “pattern” for the eyelet, which allowed me to make sure that all the lines and corners of the eyelet matched across seams. I hand basted the underlining and the eyelet together which made machine sewing the darts and seams very precise.

In order to put a sawtooth edge on the sleeves and the bottom of the blouse, I knew I would have to cut fabric on the bias. But first I had to decide how deep to make this self-trim. I did some experimenting to figure that out:

Should it be this narrow?

Or would a wider trim be better?

I decided the wider trim was necessary to make the proper impact. Here it is pinned onto one sleeve.

I decided the wider trim was necessary to make the proper impact. Here is a sample of it pinned onto one sleeve.

Once I decided the proper width of the trim, I set about hemming it by hand. Here is a photo of that “hemming” process.

On the right you can see one “peak” already stitched.

Having the trim cut on the bias gave me flexibility in attaching it to the sleeve and bottom edges. Then finishing the inside raw edges provided its own challenge. I had already used Hug Snug rayon tape to finish the interior seams. The soft, non-bulky nature of this wonder tape gave me the idea to use it for finishing the armscyes and the interior sleeve edges.

I made a bias tape out of the underlings fabric to bind the neck edge. Seam edges are encased in Hug Snug.

I made a bias tape out of the underling fabric to bind the neck edge. Seam edges are encased in Hug Snug. Click on the photo to see more detail.

The actual hem on the blouse presented me with three edges (the fashion fabric, the underlining, and the bias trim) to control and hold together. I used Hug Snug again, this time flat and sewn with a catchstitch (a fabulous idea I just got from Lilacs and Lace blog, which I will use again and again! Thanks, Laura Mae!)

The catch stitch is done across the width of the Snug Hug tape. It is the perfect technique for this application. Again, click on the photo for more detail.

I had some difficulty finding an 18” separating zipper that was lightweight enough for this blouse. I still think the one I finally ended up using is a bit heavy, but until I find another one, this one will have to do.

I still need to add a hook and eye at the top!

I have always loved overblouses. They are comfortable, classic, versatile, and just a little bit different of a look. I think this one fits that description well – I like it!

I could not resist styling this blouse with a hat!

Pale yellow shoes help complete the outfit!

After Mellow Yellow, where do I go? My next project is anything but mellow – or yellow, for that matter. June will find me thinking – and making – fancy, but not frilly. Details soon . . .

35 Comments

Filed under Blouses, Eyelet, Mid-Century style, Uncategorized, underlinings, vintage Vogue patterns from the 1960s

Tagged as Blouses, Britex Fabrics, Eyelet fabric, fashion sewing, Overblouses

May 17, 2015 · 10:25 pm

An Easy, Breezy Dress

On a recent windy day, I was thinking about Christina Rossetti’s poem “Who Has Seen the Wind?”

Who has seen the wind?

Neither I nor you;

But when the leaves hang trembling

The wind is passing thro’.

I did not remember it verbatim, coming up with this instead:

Who has seen the wind?

Neither you nor I;

But when the leaves go to and fro

The wind is passing by.

Either version seems to fit my new Diane von Furstenberg wrap dress – it reminds me of a breezy Spring day:

The pattern itself is shown here in diagram form, for those of you who have never seen, nor sewn with, a DvF Vogue pattern. As you can see, there are minimal pieces.

I don’t believe you get the sense of how long the ties are from this diagram. Each tie is 50” long, giving the wearer plenty of length to go around her waist, doubling up for part of the front, and still have enough to make a bow or loop with long ends.

I made two minor changes to the pattern from my first version of this dress three years ago: I cut the shoulders in about an inch, which I think is a more pleasing and up-to-date look. I also added ¾” to the bodice in length. For some reason, I find that wrap dresses tend to be either short-waisted or they do not allow for the fact that the ties are going around the waist twice, pulling up the skirt a small amount. Whatever the reason, the extra ¾” seems to fix the problem. I also decided to try finishing the interior seams with Hug Snug rayon binding – and it worked beautifully. I love the clean, neat finish on these seams, and the soft tape helps to keep the seams from curling in.

It was fun and rewarding to sew with genuine DvF fabric from the mid-1970s. Although I have never been a fan of sewing with knits, this knit was lovely to work on. It sewed like a woven fabric, but cooperated in easing just like a knit should. Very well behaved! I found this quote from Diane von Furstenberg especially apropos: “ Fabrics are key, since they’re like a second skin, and should always be soft to the touch and breatheable. Colors should be beautiful and harmonious, and silhouettes simple, allowing the body to move freely…” (The St. James Fashion Encyclopedia: A Survey of Style from 1945 to the Present, by Richard Martin, Visible Ink Press, Detroit, MI, c1997, page 403)

I might need to put a snap at the top of the under skirt panel to hold it even with the hem…

I made one last addition to this project: a simple hand-inked label to indicate when this dress was made, sewn onto one of the pocket selvedges. With vintage fabric and made from a vintage pattern, this dress could be mistakenly attributed to having been made in 1976. This label will help to insure that that never happens.

Every Spring deserves one easy dress, but now it is time to move on to something a little less breezy, and a little more complicated. What will that be?

28 Comments

Filed under Diane von Furstenberg Vogue patterns, Vintage fabric, Wrap dresses

Tagged as Cohama Diane von Furstenberg fabric, Diane von Furstenberg, fashion sewing, vintage Vogue designer patterns, vintage Vogue patterns, wrap dresses

May 7, 2015 · 2:42 pm

The Diane von Furstenberg Formula

Has there ever been a more iconic cover for a pattern/sewing magazine?

Instantly recognizable in her classic wrap dress, Diane von Furstenberg was featured in this September/October 1976 issue of Vogue Pattern Book Magazine. Her dress dynasty had begun in 1970, driven by her “dedication to dresses that fulfill a woman’s fashion needs from career time to cocktails…” As her business grew over the next few years, it seemed that everyone wanted one of her dresses in their wardrobe. I was no different. You can only imagine my surprise and absolute delight when my husband gave me a DvF dress for Christmas in 1975. Although I have, over the years, discarded most of my dresses from earlier times, this one still hangs in my cedar closet:

Long sleeved and with a separate tie belt.

There is a center front seam to this dress which helps to make the skirt flow beautifully.

The label gives some fascinating information. It gives the composition of the fabric, – 50% cotton and 50% rayon. Interestingly, it includes an “umlaut” over the “u” in Furstenberg, which seems to have been dropped shortly thereafter. And the size 10 would now be a size 6 in USA standards!

By 1976, Vogue Patterns had entered into a partnership with DvF, with exclusive rights to offer her dress patterns for sale. This was such a smart thing to do for both Vogue Patterns and the Princess – as they referred to her. Even better was when Diane von Furstenberg-designed printed fabric was available in bolts at your local fabric store. I remember having a difficult time finding these yard goods – they sold out so quickly as home dressmakers rushed to make their own genuine DvF wrap dresses. Vogue Pattern Magazine summed it all up quite nicely:

“Almost as important as the designs are the Diane-designed prints which turn her very flattering basic designs into that very special Von Furstenberg look. That is why, we are doubly pleased to tell you that, thanks to Cohama, you can make your Vogue Von Furstenberg in authentic Von Furstenberg prints.” First available in October 1976, many of these prints are still recognizable today as DvF prints, and they still look fresh and stylish!

A sampling of some DvF fabrics.

Here is the editor-in-chief of Vogue Pattern Magazine, Judy Espinar, with Diane von Furstenberg.

Another beautiful print!

I might not have been able to get my hands on any of that Cohama fabric back in the 1970s, but thanks to this blog and one of my readers with unused DvF yardages, I have been able to fulfill a long-held wish, having purchased two lengths of the Cohama fabric a number of months ago.

A DvF wrap dress seemed to be the perfect follow-up to my last complicated project, and so I retrieved this fabric from my fabric storage closet:

I washed it in cold water, gentle cycle, and it came out fresh and like new. I was struck by the quality of the knit fabric, and of course, wanted to know its composition. This is another time when the vintage Vogue Pattern Magazines come in so handy. Each featured pattern is pictured in thumb-nail size in a detailed Patterns Guide in the back of the magazine, giving information on fabrics, accessories, yardages needed, etc. Quickly I was able to determine that the Cohama fabric is Avril II rayon/cotton knit. This fabric is lighter in weight than my “store-bought” DvF dress. It is tightly knit, silky soft, and, like my “store-bought” dress, it cannot be “seen through,” making it easy to wear!

Along the selvedge – the mark of an authentic DvF print!

I had already made a dress from this pattern three years ago. I have enjoyed wearing it, although the fabric is a bit heavy for the design. So I thought it would be good to make it again, this time in my authentic DvF print.

I also determined that I had just enough fabric to squeak out this dress in the short sleeveless version. These wrap dresses take an enormous amount of fabric! It makes sense when you think about the overlapping necessary to make the dress wearable. When I spread out my fabric, I thought to myself, “Oh, I have lots of this – no problem!” I should have learned by now not to think such things! It quickly became apparent that I would have to be creative (again!) in my lay-out if I were to be able to make this dress.

First I made a muslin pattern with separate pieces for the reverses. This was so I could lay the pattern pieces out singly, not folded. Ever since sewing with Susan Khalje’s couture techniques, this is how I like to cut my fabric anyway, so I am accustomed to this extra step. But this time, I cut off the seam allowances (except on the long belt pieces), just as you would do when you are making a classic French jacket.

Showing a partial lay-out

With a French jacket, you are leaving huge seam allowances (usually as much as 2” all around). With this, my seam allowances had to be much smaller and in some cases a bit less than 5/8” in order to fit all the pieces on the fabric. I had to really concentrate when I was cutting out the pieces, remembering to add seam allowances by “eyeballing” them. Now I am in the process of thread-tracing around each piece of the muslin pattern, to set my sewing line. This seems like a lot of extra work – and it is – but I determined this to be the only fool-proof way to make it work! (I did not want to using tracing paper and wheel to mark the seam lines, as I would risk markings showing up on the right sides.)

The back bodice piece, ready for thread tracing on the sewing lines.

I am excited about this dress! Since I have already made this pattern once, I know what needs to be tweaked. And – I am excited that I do not have to line it, it has no buttons or buttonholes, and I know it will be easy-wearing. That, to me, is a formula for fashion sewing success.

23 Comments

Filed under Uncategorized, vintage Vogue Designer patterns, vintage Vogue patterns from the 1970s, Wrap dresses

Tagged as Cohama Diane von Furstenberg fabric, Diane von Furstenberg, fashion sewing, vintage fashion, wrap dresses

April 26, 2015 · 10:16 pm

My Suit Dress Fully Evolved – Finally! – Part 5

Can it really be that May will arrive in a few days? If that is true, then I am only about 2 months behind in my sewing schedule. But who’s keeping track? I’m happy that I have plowed through to finish my wool suit dress, even though it will immediately go into my cedar closet for safe storage until next Fall.

When I fell off the edge of the world after Part 4 (only figuratively, thank goodness!), I was starting on the sheath dress. I had decided to add a collar to it, so that I could use that fourth vintage button (I had already used three on the jacket itself). Matching the windowpane plaid on the collar section took some special attention, as this photo shows:

I underlined the collar with the lining fabric, and I made a working bound buttonhole instead of just sewing the button in place. Anything to make it more involved, right?

Detail of the button on the collar.

Lining the collar with silk charmeuse reduced bulk and helps it lay flat.

From that point on, it was a straightforward sheath dress. I love a sheath dress. I think it is such a flattering silhouette, and very feminine. As far as I am concerned, one can never have too many sheath dresses (just as one can never have too many shoes). Speaking of shoes, I decided this outfit needed complementary shoes! What do you think?

I wear a lot of red and blue, so I expect these shoes to serve me well!

It turns out that even a simple sheath can take a lot of time to make when one is using couture techniques: underlining of silk organza; interior seams catch-stitched; hand-picked zipper; instead of facings, neck and armholes finished with lining-abutted edges, then pick-stitched for stability. The silk charmeuse lining in the dress matches the jacket lining and is an extravagance, I will admit. But it feels heavenly, and adds a fluidity to the dress which is a good match for the butter-soft cashmere wool fashion fabric.

Shown with the jacket unbuttoned.

A close-up look…

… and another one.

And a partial back view.

I am happy I added the collar to the dress, as that extra detail seems to help the dress stand on its own if/when I take the jacket off. Framing the face is always a good fashion decision, and I think the collar helps in that regard.

Just the dress!

So happy this is finished!

I consider finishing this outfit a major accomplishment! So what’s next? Something easy or something more complex? Those questions to be answered soon, with this caveat: it will most definitely be something for Spring/Summer!

Details:

Navy blue Cashmere fashion fabric: Britex Fabrics, San Francisco, CA

Silk charmeuse lining fabric: Britex Fabrics

Buttons: vintage Ultra Kraft, ca. 1950s

Shoes: Ferragamo

Patterns: Jacket: vintage Jo Mattli Vogue Designer pattern; Dress: vintage Vogue blouse pattern combined with new Butterick dress pattern

31 Comments

Filed under Buttons - choosing the right ones, couture construction, Dressmaker suits, Shoes to make an outfit complete, Suit dresses, vintage buttons, vintage Vogue Designer patterns, vintage Vogue patterns from the 1970s, woolens

Tagged as Britex Fabrics, couture construction, fashion sewing, Jo Mattli Vogue pattern, sewing, sheath dress, vintage Vogue patterns, women's dress suits

March 26, 2015 · 1:16 pm

The Evolution of a Suit Dress, Part 4: An Appreciation of Jo Mattli, and Dress-making Days Commence

The New Vogue Sewing Book published in 1963 contained a “Couturier Supplement”. According to the Foreword in this magazine-styled book, “Only Vogue Patterns can bring you original designs from the Paris and International Couture houses, because of an exclusive arrangement with world famous designers.” One of the 17 designers featured in the supplement was Jo Mattli.

Jo Mattli is second from the left on the top row. Click on the photo to see the image up close.

A quick look at the two-page spread on these designers shows a veritable who’s who of fashion design, with names very much still known today. Except for perhaps Jo Mattli. (Mattli was born Giuseppe Gustavo Mattli in 1907 in Locarno, Swirtzerland; he died in 1982 in England). He is absent from The St. James Fashion Encyclopedia, even though he was considered one of the “big ten” London couturiers in 1953, when London Society was busy readying for the coronation of Queen Elizabeth II. Perhaps it was his move into ready-to-wear in 1955 that relegated him to lesser status among the world’s great couturiers. This did not keep Vogue Patterns from recognizing his wide appeal to stylish women who appreciated his attention to fine detailing, and his expertise in creating practical, wearable and charming dresses and suits. As one of Vogue’s featured designers in their Vogue Couturier Design-labeled series, Jo Mattli made his mark. Indeed, even he recognized the value of being part of Vogue Patterns, saying “the royalties from these patterns had helped support his couture business” (from Wikipedia, the free encyclopedia).

The jacket I just completed (part one of a two-part jacket and dress ensemble) is the third Jo Mattli Vogue design I have sewn. Two years ago I made a suit from this pattern:

I would like to make this pattern again. The first time I made it, the fabric I chose was too heavy, but the fit and the styling were excellent.

Late last summer I made a cocktail dress from this pattern:

I still have plans to make the coat, to coordinate with the cocktail dress.

And now with three “makes” under my belt, my appreciation for Mattli’s design and construction sense is growing. Not only that, I realized after going through my pattern collection, that I have two more Mattli patterns, each of which also displays his characteristic and interesting seam detailing.

This is actually a one-piece dress, although it looks like it is a two-piece outfit.

Another beautiful suit!

While the Mattli-designed jacket in my suit dress ensemble is certainly the star of the outfit, I am hoping the dress will have its own charms. After being out of town and away from my sewing all last week, I have now been able to turn my attention to the dress part of the outfit. I believe I have successfully combined two patterns (sheath dress and collared blouse) to create – what else? – a collared sheath!

I was still adjusting the fit when I took this photo. Hopefully it will not look like a bag when I actually wear it!

After I had the muslin fitted and completed, I got the idea to make the end of the tab on the collar rounded, to mimic the curves on the jacket’s sleeves and on the jacket’s lower front edges. I also had to take significant width out of the collar. I am hoping it will work and look good…

This shows the curved detail on the edge of the sleeve.

This shows not only the added curve to the collar end, but also how much width I had to remove from the collar pattern

This shows not only the added curve to the left collar end, but also how much width I had to remove from the collar pattern.

And here is the right collar section.

I hope that Jo Mattli would approve of a dress being paired with his jacket. He would probably refer to it as a “slimline afternoon dress” were he alive. I have no doubt he created many such beautiful dresses in his lifetime.

[NOTE: Jo Mattli is the subject of a thesis by Dr. Caroline Ness entitled Famous, Forgotten, Found: rediscovering the career of London couture fashion designer Giuseppe (Jo) Mattli, 1934-1980.]

10 Comments

Filed under Cocktail dresses, Dressmaker suits, Jo Mattli, Suit dresses, Uncategorized, vintage Vogue Designer patterns, vintage Vogue patterns from the 1960s

Tagged as fashion sewing, Jo Mattli Vogue pattern, sheath dress, vintage fashion, vintage Vogue patterns, women's dress suits

March 13, 2015 · 4:53 pm

The Evolution of a Suit Dress – Part 3: Finished Jacket

It is a fairly well-known fact that making a classic French “Chanel-like” jacket takes about (or at least!) 70 dedicated hours of sewing time. I did not keep track of the hours I spent on my Jo Mattli-designed jacket, but I am guessing that it rivals – in time spent sewing – both of the classic French jackets I have made. However, I am not complaining. I would commit to it all over again. And just think – I still have to make the coordinating dress for this jacket!

But it is finished, and happily so. One of the true joys of sewing is the ability it gives us to make some stylistic changes, add embellishments if desired, and use our heads to determine what works and what doesn’t work for the fabric we are using and the intended usage of our garments. While I did not make any stylistic changes to this jacket, I did add my own “dressmaker details” while stitching my way through this project. But first a few more regular details, picking up where I left off in my last post.

1) To finish the underside of the bound buttonholes, I used organza patches. I have started using this method all the time, as it makes such a neat, fool-proof finish.

The silk organza patch is sewn onto the right side. After cutting and clipping the corners – carefully! – you turn the organza and you have a perfectly finished opening to back up to your bound buttonhole. Then it is easy to sew the two sides together very neatly.

2) Even though the entire jacket is underlined with silk organza, I added another layer of silk organza “interfacing” to the hemline, as directed in the pattern instructions.

I always like to baste the hem along the bottom edge to stabilize it until the jacket is complete.

3) I used black “cigarette” which I purchase from Susan Khalje’s store for the sleeve headings. I doubled and graduated the two layers to achieve the correct amount of sleeve–cap cushioning. Unfortunately, no photos were able to pick up the details in this – too much black and navy blue and not enough contrast!

This is what the “cigarette” looks like.

One of the interesting construction details in this design is the notched collar. Most notched collars are seamed at the “notch,”,joining the upper collar and the front facing and forming a “V”.

This diagram from The Vogue Sewing Book. c. 1970, Butterick Division, New York, New York, shows a classic notched collar.

However, the collar in this Mattli design is formed by extensions of the front facing, with a center back seam on the upper-collar portion of the facings. Hopefully these photos will explain better than words can:

You can see there is no seam at the “notch.”

Here is the seam at the back upper collar.

While I was contemplating the lining for the jacket, I thought it would add just a really special touch if I did a interior bias piping to set off the lining where it joins the jacket along the front edges and around the neck. Normally this is made out of silk, but I did not have any light-weight silk which was the correct color of red. However, I did find some scraps left over from a red wool challis maternity dress I made for myself over 34 years ago. (Yes, you read that correctly!) Very light in weight – and the exact color I needed – made it the perfect fabric for this detail.

I cut a bias strip one inch in width and folded it in half. I guess this proves it pays to save scraps!?

This is such an easy flourish to do, and it adds such a professional touch. Adding this flat “piping” is quickly becoming a standard for me when I make jackets or coats. Once you have your bias strip cut, folded in half and pressed, all you need to do is baste it in place along the line where the lining will be hand-stitched to the jacket interior.

The bias “piping” basted in place. Click on the photo to see it close-up.

And here’s what the finished lining looks like:

Here is the back neck edge.

I really like this extra flourish.

Now – true confessions! After top-stitching the sleeve edges, the collar and most of one front, I decided I did not like it. I thought it detracted from the windowpane of the fabric, so I took it all out. NO top-stitching – for me – on this jacket!

Finally, I made a small change to the back hem of the jacket. Can you figure out what it is? (A previous photo of the jacket back will also give you a clue.)

I used a trick I learned from my French Jacket class with Susan Khalje: I added a slight curve to the hem and lengthened it by about a half-inch, graduating it back to the prescribed hemline at the side back seams. I love this graceful detail. I believe it will be especially effective when it is paired with the dress. (This photo also shows that all the hours I spent on the layout, making sure I had matched the plaid, was time well spent!)

Speaking of the dress (and matching more plaid) . . . I never imagined I wouldn’t have this entire ensemble completed by about now. So – it looks like I’ll still be sewing on wool when Spring arrives. Hopefully by the time Spring departs I will have moved on to something more seasonal!

26 Comments

Filed under bound buttonholes, couture construction, Dressmaker details, piping, Suit dresses, Uncategorized, underlinings, vintage Vogue Designer patterns, vintage Vogue patterns from the 1970s, woolens

Tagged as couture construction, fashion sewing, Jo Mattli Vogue pattern, vintage fashion, vintage Vogue patterns, women's dress suits

March 2, 2015 · 10:19 pm

The Evolution of a Suit Dress, Part 2: Details, Details

How can something which is taking so much time to make still be so much fun? It must be because of all the delightful details to consider, to execute, to alter, and to research. One of the most important details for the jacket of a project like this is the choice of buttons.

One of the advantages of having my blue windowpane-checked cashmere for a couple of years before sewing with it has been the opportunity to find just the right buttons. When I came across these buttons in an Etsy shop, I knew they would be perfect.

These buttons are 7/8″ square.

The size is right, as is the shape – which picks up the “square” in the fabric. How I was so lucky to find them in navy blue, I’m not sure. Additionally, and this is very subtle, but the depth of the buttons allows a curvature to each edge, which mimics the curved front edge of the jacket and also the curved cuffs. Of course, when making bound buttonholes, one must have the buttons in hand before beginning the project, since the buttonholes are one of the first details to execute.

One can never have too many markings basted in place for bound buttonholes!

Because I need only three buttons for the jacket, the fourth button has been rattling around in my brain. I think I might possibly be able to use it as a coordinating detail on the sheath dress I have planned for this ensemble. Back to my vintage pattern collection I have gone to look for some suitable inspiration. What I have found is this pattern:

Although I have yet to work out the logistics, I am thinking that I can turn the collared blouse with the one-button detail (lower right) into a sleeveless sheath dress. The button may not really show (I think) unless I take the jacket off, but I kind of like the subtlety of it all. Once I make a muslin (toile), I will have a better idea of how it will look, so stay tuned! One thing I do know, is that such a collar on the dress will need to lay very flat, with no bulkiness. One way to achieve that will be to back it with the silk charmeuse I will be using for the jacket and dress lining instead of backing it with another layer of wool.

So what am I using for the lining? When I bought the lining for my color-blocked coat last winter, I purchased extra yardage of the silk charmeuse (from Britex). Now I can’t remember what my reasoning was, but once I got it home from San Francisco and I saw how complimentary it was with the navy blue cashmere, I knew I should save it for this project. Fortunately, I have enough of it to line both the jacket and the dress. Not that anyone is ever going to see the lining in the dress, but I’ll know it’s beautiful – and oh, so wonderful to wear!

There are always lots of details in the construction of a rolled collar. At the risk of boring some of you, I’ll quickly go over a few tricks I learned from Susan Khalje last year when I made my color-blocked coat. First, here is a picture (by request from some of you) of the lightly pad-stitched and interfaced jacket front.

Here is an inside look at the interfaced right side of the jacket showing the underside of the buttonholes.

Here, too, is an inside look at the underside of the three bound buttonholes.

The undercollar is also interfaced with black silk organza. It is basted onto the body of the jacket in order to establish the roll line. Once I marked the roll line with pins, I removed it and basted along the roll line in preparation for heavy pad-stitching of that section.

Establishing the roll line of the undercollar.

The roll line is marked with pins; then I basted along that pin line.

Once I finished the pad-stitching (impossible to see here on the black organza), I then placed it on the dress form, pinned it in place and steamed it. This process reinforces the “memory” of the roll.

A dress form is indispensable for steaming the undercollar. You can see the basted roll lie in this photo.

A dress form is indispensable for steaming the undercollar. You can see the basted roll line in this photo.

The back of the undercollar after steaming.

As I make progress on this jacket, I am reconsidering the amount of top-stitching I want to do on it. The pattern calls for double rows of top-stitching along seam lines, front edges and sleeve edges. I plan on modifying this somewhat.

This diagram clearly shows the extent of proposed top-stitching. I will definitely not be doing this much!

Top-stitching always makes me nervous. It may be my least favorite part of sewing. I’d rather sew on buttons than top-stitch! Let’s see how well I do with it – in my next post – before I can get back to more fun-stitching.

16 Comments

Filed under bound buttonholes, Buttons - choosing the right ones, couture construction, Suit dresses, Uncategorized, vintage buttons, vintage Vogue Designer patterns, vintage Vogue patterns from the 1970s, woolens

Tagged as Britex Fabrics, Choosing buttons, couture construction, fashion sewing, sheath dress, vintage fashion, vintage Vogue patterns, women's dress suits

February 22, 2015 · 4:17 pm

The Evolution of a Suit Dress, Part 1

“Suit dress – Used in 1960s to refer to a jacket and dress ensemble that resembled a tailored suit.” (The Fairchild Dictionary of Fashion, Third edition; Fairchild Publications, Inc., New York, New York, 2010)

Although the inspiration for my current project does not have its beginnings in the 1960s, it is certainly influenced by that era. The actual beginning was about 1974 or ‘75, although I did not know it then. That was when I first laid my eyes upon this Jo Mattli Designer pattern from Vogue:

I loved the tailored, but feminine, look of the jacket, with its high, notched collar and its sleeves with gracefully curved slits. (I was less enamored with the style of the skirt, but skirts can easily be substituted, of course.)

This diagram of the jacket back better shows the interesting treatment to the cuff edges of the sleeves. Click on the picture to see a close-up view.

I admired this pattern on a regular basis while it was listed for sale in the Vogue Catalogue at my local fabric store, but in the end I didn’t buy it. That hefty $3.00 purchase price, and not knowing for sure that I would actually end up making this outfit, kept me from its purchase. Now I am not nearly as practical – or maybe I have learned from experience. One must get these things which speak to them while they can! So when I found this pattern a couple of years ago on eBay, I knew it was time to fulfill a long-delayed dream (at a much higher price than $3.00, I might add!).

Shortly thereafter I found this navy blue, windowpane-check cashmere fabric on one of my trips to Britex Fabrics in San Francisco. I purchased what I was sure would be ample yardage to make a two-piece suit (jacket and skirt, with this Jo Mattli design in mind) and to compensate for matching the plaid. Then I set it aside, knowing that the time to start this project had to be right.

The feel of this wool is best described as like soft butter.

I am so glad I waited. As I have grown in my sewing and dressmaking skills (with so much credit in that arena attributed to what I have learned in classes with Susan Khalje), I came to see this fabric and this suit taking on a slightly different appearance. I knew I wanted to make the Mattli jacket, but more and more I felt that this fabric was too special to mix it up with a blouse, no matter what color or how simple that blouse might be. I began to envision the jacket paired with a sheath dress – in effect, a classic 1960s’ inspired suit dress.

But would I have enough fabric? Britex has always been very accommodating when cutting yardages for me, adding inches to compensate for the layout of plaids and designs, and simply being generous in adding a few inches to my requested amount. (I have found most fine fabric stores to be similarly inclined – Mendel Goldberg, for example, also adheres to this customer-friendly practice. Have you found this generally to be true as well?) Well, those of you who read my blog know that a little shortage of fabric has never kept me from my intended goal. Of course, I would have enough fabric… And so I do, especially with those few extra inches courtesy of Britex added on!

Fitting the muslin (toile) for the jacket took more thought and planning than usual. Much of this is because the pattern I found on eBay was actually one size smaller than what I usually buy and wear. For some reason I find it easier to size down patterns than size them up, so I’d rather, if necessary, start with a too-large pattern than one too small. Adding length and width to the body of the jacket, fitting the sleeves (which also needed a little more circumference) into those new dimensions, and adjusting the front/neck facing, which is part of the notched collar, was quite a puzzle. It took days!

I transferred my final changes from the muslin to silk organza, and then I was in business. I love a challenge, and it’s a good thing I do! Do you know how nerve-racking it is to make sure all your plaid lines match up vertically and horizontally? Also, I knew I could lay out only the jacket pattern pieces initially. There are two reasons for this: one is that I have not yet determined which sheath dress pattern I want to use. The other is that the plaid on the dress is going to have to match – perfectly – the plaid in the jacket horizontally first, with the vertical match being as close as it can be, taking into account darts and the curves in the body of the dress. So – I have to finish the jacket before I can lay out the dress. That fortuitously gives me some more time to think about the dress, which is still taking shape in my mind!

I chose to use white silk organza rather than black, as it is much easier to see the windowpane lines through the white, and easier on the eyes, too.

I chose to use white silk organza underling rather than black, as it is much easier to see the windowpane lines through the white, and easier on the eyes, too.

This photo better shows my markings on the silk organza underlining.

With all the silk organza underlining basted onto the wool, I am ready to sew.

A pile of prepared pieces!

But hold the horses there, Fifty Dresses! First, there are interfacings to be pad-stitched and bound buttonholes to be made.

I am using black silk organza for the interfacing. This is what I did on my color-blocked coat, under Susan Khalje’s tutelage, and I was delighted with the results!

It is clear there is no hurrying this jacket, nor should there be. Some dreams just take a little more time.

17 Comments

Filed under couture construction, Dressmaker suits, Mid-Century style, Suit dresses, Uncategorized, vintage Vogue Designer patterns, vintage Vogue patterns from the 1970s, woolens

Tagged as Britex Fabrics, couture construction, fashion sewing, Jo Mattli Vogue pattern, Mendel Goldberg Fabrics, vintage fashion, vintage Vogue patterns, women's dress suits

February 1, 2015 · 3:53 pm

Good Bones

Can a pattern have good bones? I think so. When I purchased this blouse pattern a while ago, I did so knowing that I would not be making a blouse that looked exactly like any of the three illustrated on the pattern envelope.

I have always liked a feminine-looking blouse that opens in the back, and I have always liked Peter Pan collars (which seem to come in and out of fashion). I also like a blouse that is fitted with darts through the body of the blouse. You can easily see the darts illustrated above. The thumbnail views of the blouses also show the darted fitting in the backs of the blouses.

I found it interesting that these blouses are constructed with zippers in the backs. I am not fond of blouses that are zippered up the back, but I knew that I could easily make the back into a buttoned closure.

Interestingly, this pattern is from a narrow period of time when Vogue initiated their “new” sizing, which added a half-inch to sizes 8 and 10 in the bust and in the hip. I believe this new sizing was only in effect from about 1968 through about 1972 or ’73. In any event, it helps to date this particular pattern. When I decided to make my blanket dress into a jumper, with a blouse matching the yellow lining, I went to this pattern for its good bones: darted fit, back opening, and pretty sleeves.

I re-cut the neckline so that it was wider, following the neckline on my completed jumper. The Peter Pan collar was too wide to my thinking, so I narrowed it by about an inch. Instead of using facings, I bound the raw neck edge with self bias binding. The hand-stitching on that is hidden beneath the collar.

You can see the wider cut of the neckline of the blouse in this photo.

I added two inches to each of the the back seam lines so that I could button , rather than zip, the back, and I took a bit of the width out of the sleeves so they would be a bit less flow-y (is that a word?)

The slightly fitted bodice helps it to lay without bulkiness underneath the jumper. I found vintage mother-of-pearl buttons in my button box, two smaller ones for each sleeve and five slightly larger ones for the back. Why it always give me satisfaction to use buttons I have on hand, I don’t know, but I was feeling quite delighted with my finds!

Unfortunately, I am having problems with the main lens I use for my camera, so I had to resort to my old “point and shoot” for these photos, which makes them adequate, but that’s about all. Also, I’ll have to add photos of me actually wearing my new jumper and blouse at a later date, due to this inconvenience. My apologies…

Less than a month ago, when I was “planning” out 2015’s sewing, I did not envision that January would also produce a blouse to wear with my blanket dress. But that is one of the charms of fashion sewing – the spontaneity of a project that says “Me, Me, choose Me!” And so I did, and I am not only happy with the result, but delighted to have a tried and true “good bones” blouse pattern to use again and again, whether in the plan or not.

18 Comments

Filed under Blouses, Buttons - choosing the right ones, Love of sewing, sewing in silk, Uncategorized, vintage buttons, vintage Vogue patterns from the 1970s

Tagged as Blouses, Choosing buttons, fashion sewing, love of sewing, silk, vintage fashion, vintage Vogue patterns

January 23, 2015 · 7:18 pm

January Jumper

My blanket dress has morphed into a jumper. Not that that means it is going to look any different. Probably the biggest question I had when deciding to make my Irish blanket into a dress instead of a skirt was “how practical is this”? A sleeveless “everyday” dress for Winter? It was a given fact that I would be wearing a cardigan sweater with it, but I wasn’t sure I could find a suitably hued sweater to go with the bold plaid of the blanket. I had visions of taking up knitting (which I still should do…) in order to get the correct sweater match for this dress.

And then, last week in the Style section of The Wall Street Journal the lead article was entitled “How Dresses Lost Their Sleeves.” The sub-caption was “Women Want to Cover Their Arms Comfortably, but Designers Say That is Asking too Much.” It seems that many designers consider sleeves to be “frumpy”. Apparently, it is “so tricky to make a flattering sleeve that is roomy enough to offer a full range of motion.” (I can’t help but insert here a MEMO to current designers: take a hint from styles in the ‘50s and ‘60s. Sleeves were often designed in two pieces to create extra give without bulk, many sleeves had two or even three elbow darts to add ease of movement, and of course, kimono and dolman sleeves were stylish and their roominess added to the overall look of a dress or coat.) But – back to the sleeveless dress dilemma. The three solutions offered in the article are, of course, first, pairing that sleeveless dress with a cardigan sweater; second, wear a coordinating blazer or jacket with the dress; and third, “layer a thin T-shirt, turtleneck, or blouse under the dress – taking care to choose a neckline that looks graceful with the dress.” Of course! This solution makes the dress into a jumper! The term “jumper” conjures up visions of school uniforms, little girls’ attire, and bib aprons for many people, but for me, it reminds me of a look I have always loved and enjoyed wearing.

This entry from The Fairchild Dictionary of Fashion, Third Editiion, Fairchild Publications, Inc., New York, New York, 2003, defines various types of jumpers, including the A-line jumper.

About the time I was reading this article, I had already cut the lining for my blanket dress. I had (very proudly, I might add) found some yellow crepe de chine in my fabric collection which I knew would be perfect for the lining. Not only did this mean I would not have to buy another piece of silk, but this particular color of yellow also had a slight brownish-greenish tinge to it, making it a pretty and pretty perfect complement to the plaid of the blanket.

Not sure the real color of this silk comes through here, but it’s close!

Now a woman with a mission, I checked on the remaining yardage of the yellow silk. I pulled out a vintage blouse pattern which I thought would compliment the lines of the dress and the neckline. I laid the pattern pieces out to determine if I had enough fabric to make a long-sleeved blouse. Yes, I am sure I do if I am “creative” when laying it out.. (When do I ever not have to be creative in my pattern lay-outs?)

And that’s how my dress turned into a jumper. Talk about frumpy! But seriously, how frumpy can a fringed-hem jumper be? I don’t think it will be, but I guess we’ll see for certain after the “ensemble” is complete. In the meantime, I’ll share the details of the finished jumper/dress .

1) I used brown thread to sew the fashion fabric, and it blended in beautifully.

2) The dress is underlined in white silk organza.

Here are the silk organza pattern pieces arranged on the fashion fabric.

I cut the silk organza the full needed length of the dress in order to know exactly where the fringe should be placed for the hemline.

I trimmed the organza about an inch from the beginning of the fringe and catch-stitched the edge of it very carefully to the fashion fabric. The tight weave of the blanket allowed me to do this without stitching or pulling showing on the right side of the dress.

3) I cut the armholes a little deeper than I would for a sleeveless dress, in order to accommodate the sleeves of the still-to-be-made blouse.

4) After trying it on to check the fit, it felt funny not have more weight at the hem other than the single layer of fringe. So I got the brainy idea to double up the fringe if I had enough left in my scraps. I wasn’t sure how I was going to do this, but I thought I could somehow figure it out. Sure enough, with piecing and matching, I had enough fringe to add another layer directly underneath the existing layer. When I found a long piece of brown rayon hem tape (vintage, no less, complete with rusted pin holding it all together!), I knew I had a plan. I stitched the pieced sections of fringe onto the rayon tape, and then hand-applied it to the dress. First I attached the upper edge to the lower raw edge of the silk organza , and then carefully slip-stitched along the “hem” edge to make the two layers of fringe act as one.

Another look at this!

5) Of course you already know the dress is lined in yellow crepe de chine!

6) I saved the label from the blanket and sewed it into the back neck edge, so I’ll always be reminded of our lovely trip to Ireland when I put this on!

I guess on really cold days, even a blouse may not be enough to keep arms warm. I just may have to be really frumpy and wear a long-sleeved silk under-shirt underneath it all. Or maybe I really should take up knitting?

18 Comments

Filed under couture construction, Jumpers, Uncategorized, underlinings, woolens

Tagged as couture construction, fashion sewing, Irish woolens, jumpers, sheath dress, Wall Street Journal Fashion coverage

Tag Archives: fashion sewing

Mellow Yellow

An Easy, Breezy Dress

The Diane von Furstenberg Formula

My Suit Dress Fully Evolved – Finally! – Part 5

The Evolution of a Suit Dress, Part 4: An Appreciation of Jo Mattli, and Dress-making Days Commence

The Evolution of a Suit Dress – Part 3: Finished Jacket

The Evolution of a Suit Dress, Part 2: Details, Details

The Evolution of a Suit Dress, Part 1

Good Bones

January Jumper

Follow fifty dresses via email

bloglovin’

Recent Posts

Archives

Categories

Meta