Category Archives: Linings

April 9, 2020 · 4:23 pm

From Ready-to-Wear to No-Wear

Is a dress really complete if one has nowhere to wear it?  Well, yes, I think it is. Otherwise, I fear, I never would have finished this dress.

Its inspiration came from a ready-to-wear dress I spied on the Halsbrook website.

My original intention was to make a wool dress using this vintage royal blue-and-black houndstooth boucle I found several years ago.

After deciding it was just a bit too hefty to use for a dress, I switched gears and ordered this boucle from Linton Tweeds in England.

It is a cotton, silk and viscose blend with a lovely hand and a beautiful luster to it.  The colors look like the woven manifestation of Spring, and once it arrived, I was feeling very grateful that I was moving on to some warmer weather sewing rather than being stuck in a Winter project.  Below is the vintage pattern I had chosen to recreate the look of the ready-to-wear dress.

I used this pattern once before and knew it would work beautifully for this purpose.

All was not so merry, however, once I had my silk organza underlining cut out.  While positioning it onto the boucle fabric, I had a rude realization that the boucle, despite its very even grid, was an uneven plaid, in regard to color.  There was no way I was going to be able to balance the colors evenly across the width of this dress.  I had to make a decision how I wanted to treat the center front seam (which helps with the shaping of the dress).  I also had to determine which of the colors was dominant in the grid and then try to fixate on getting that evenly spaced.

After much debate, I decided to use the yellow as the dominant color, and I decided to “railroad track” the center seam, disrupting the even windowpane grid in that spot.

This picture shows how I tried to balance the yellow on the front of the dress, which I was able to do by narrowing the windowpane in the center seam.

I guess I have looked at this dress just a bit too much, as I am still second-guessing myself.  Sometimes it looks okay to me and other times, all I see are the unevenly spaced pink and green grids.

I decided to line the dress in pale-ish yellow crepe de chine, ordered from Emma One Sock Fabrics.

When it came time to finish the inside neck edge with understitiching, I was completely out of matching yellow thread.  Of course, with all the non-essential stores closed (since when I ask, is a sewing supply store considered non-essential?), I had to choose another color for that task.  I went to my supply of vintage buttonhole twist and found coral pink, a nice substitute.

I machine-sewed strips of silk organza interfacings onto the edges of the sleeves and hem, so that I could fray them confidently.   Then I finished the interiors by hand.  Somehow, most vexingly, I lost my pictures of this process.

I actually used the reverse side of the fabric for the double-wide fringe several inches up from the hemline.  It gave me another “railroad track” detail which I thought would help make sense of that center front seam.

This is the reverse side of the fabric.

And here is the double-sided fringe attached to the skirt. The “railroad track” motif is visible in the center of the fringe.

Can you tell I was consumed by this uneven color scheme?  I think it is still playing games with my head, but the good news is, once I did the final try-on of the dress, I thought it looked okay!

I’m not looking back any more on this one!

Well, from Ready-to-Wear to No-Wear to currently No-Where to Wear anything pretty, the only way to go is towards the time, hopefully soon, when we can all be thinking,”So many places to go, so many new dresses to Wear.”

 

45 Comments

Filed under couture construction, Day dresses, Hem facings, Hems, Linings, Uncategorized, vintage Vogue patterns from the 1960s

Tagged as , , ,

January 5, 2020 · 7:03 pm

The Last Dress of the Year Past

Little did I know when I found this “end-cut” earlier in the year at Mendel Goldberg Fabrics that “classic blue” would be chosen as Pantone’s Color of the Year for 2020.  But so it was, which makes my last dress of 2019 the perfect transition into the new year and the new decade.

This an Italian silk charmeuse, in a dotted and printed jacquard.

I am one of those people who rarely goes looking for a particular fabric.  I think fabrics find me and when this fabric found me, I really had no plan for what I would make out of it.  But as soon as it arrived, I knew immediately I wanted a sheath dress with three-quarter length sleeves and a V-neck.  I tucked it away, happy with the thought of making this dress, and knowing I had the perfect pattern to make it a reality.

View C, of course! And look at those lovely shaping darts.

This Vogue pattern is from the early 1960s, a little tattered and worn, but very versatile and beautifully engineered.

After finishing my granddaughters’ December dresses, and then my pink Parisian Jacket, and then some cute little flannel blouses for gifts for my little girls, I envisioned finishing this dress to wear to holiday parties.  What was I thinking?  First of all, after tweaking the pattern one last time (I had had the pattern fitted a couple of years ago while in a class with Susan Khalje), it took two full days – yes, TWO – to figure out how in the world to lay out my pattern pieces.  Truth be told, I really did not have enough fabric.  I should have reconsidered, but I am stubborn and tenacious when it comes to my sewing “visions.”  I finally decided that I could exactly match the print on the back center seam and make it sleeveless – OR I could have sleeves and not match the back.  I really, really wanted sleeves.  It had to have sleeves.  So I did the best I could with making the back seam look okay, and I got my sleeves.

Fortunately the all-over placement of the floral motifs lent itself to imprecise matching better than many fabrics would.

And what lovely sleeves they are!  When Susan fitted the pattern, she elongated the top curve of the sleeve to accommodate my prominent shoulders.  She also added a dart at the shoulder of the sleeve (actually slightly forward from the marked shoulder of the pattern to accommodate the roll of my shoulders).  I added a slight amount to the width of the sleeve, about 3/8”.  I have found these vintage patterns are often narrow in the sleeves.

The purple lines are the changes to the muslin.

The double elbow darts in the sleeves make a lovely fit and are placed precisely where they should be.

It’s a little difficult to see the double darts, but they are there!

When it came to the V-neck, I knew I would need to use a facing of some sort, but I did not have enough fabric to cut a full facing.  So – I cut a partial facing instead, just enough to be able to turn the V and have it stable.  (The first thing I did when I started sewing the dress, was to reinforce that neckline with a strip of silk organza selvedge.)  Well, this worked like a charm, much to my delight.

The partial facing extends up from the bottom of the V about 2.5 inches, and then the turned- back seam allowance takes over.

Then I brought the lining fabric right to the edge of the neckline and understitched it to secure it in place, just as you would expect a couture dress to be finished.

I chose a “mushroom” colored crepe de chine for my lining. Blues are very difficult to match as you know, so I decided a contrast color would be best. The lining fabric is from Emma One Sock Fabrics.

I used blue thread for the under stitching.

I used a lapped application for the hand-picked zipper.  The more I use the lapped insertion for zippers, the more I like it.  And I especially like it in a center back seam.

I’m feeling quite pleased with this dress!

There is not much more to say about this blue floral dress, except that it was not finished in time to wear to any holiday event.  Which was fine!  Once I realized this would be the case, I was able to really enjoy the process of making it.  It was a delightful way to end the year – and the decade, which has had such a profound effect on my sewing.

 

37 Comments

Filed under couture construction, hand-sewn zippers, Linings, Mid-Century style, Pantone Color of the Year, Polka dots, sewing in silk, Sheath dresses, Sleeves, Uncategorized, vintage Vogue patterns from the 1960s

Tagged as , , , , , ,

December 12, 2019 · 1:20 pm

Making a Parisian Jacket, Part 2 – and on to the Finish

Oh, lets’s just skip Part 2 and go right to the finish!  To be honest, a separate Part 2 was somehow lost in the midst of a flurry of sewing while I concentrated on “December Dresses” for my two granddaughters.  More on those another time.

When I returned to my Parisian Jacket, I was almost ready to tackle the gussets.  Sewing the bottom curved seam of the gussets was easy to do on the machine.  But when it came to the other two seams, working in such tight angles, I did not even try to sew them on my machine.  I went right to hand sewing them, using a small tight backstitch, and I ended up with good results.

Having the gussets finished meant that the basic body of the jacket was together.  Then it was on to the collar and the front facings.  Following Susan Khalje’s video instructions, I was able to get a very precise finish to the collar.

I had to be careful to match the weave of the fabric, up and down and across.

There are two bound buttonholes in the right front of the jacket, and this is where I deviated slightly from the order of construction that Susan was following.  Instead of partially sewing on the right front facing and then making the buttonholes, I did my buttonholes before I attached any part of the facing.  I felt like I had more control doing it this way.

The finish of the buttonhole on the ifacing.

The finish of the buttonhole on the facing. (Please pardon the cat fur!)

Whenever I have made a Classic French Jacket, I have added a slight curve to the back hem, and I find this to be very pleasing.  I decided to do the same with this jacket.  At the center back I marked the hemline at 5/8” below the marked hem, and then I gradually curved it up to the side point of the jacket.  It is quite subtle, but I think a nice addition.

I went round and round with buttons for this jacket.  Ideally I would have loved to find some pink ones, but the pink of this vintage Linton fabric is really not a clear pink.  It is a bit “dusty” and finding buttons to match proved too big a task.  So I opted for these vintage mother-of-pearl gray buttons, which happen to have pink overtones to them.

I expect to wear this jacket with gray quite a bit, so the gray buttons make sense to me.  I actually really like them now that they are on.

I chose a pink silk charmeuse from Emma One Sock Fabrics for my lining.  I would have loved to use a flowered silk, but the ‘see-through’ factor of the light pink wool prohibited that.  And actually the pink lining seems to add some vibrancy to the fashion fabric.  It makes a very pretty “inside”.

I sewed the lining in entirely by hand, which was an option. The front seams of the lining could also be machine stitched.

This was a very time-consuming project, even without making granddaughter dresses in the midst of it.  The video series is 13 parts long and Susan is extremely complete in her instructions.  I attribute my success with this jacket to three main facts:

  • I basted every seam before machine sewing them, even the seams in the lining.
  • Except for the bound buttonholes, I carefully followed Susan’s order of construction as she laid them out in her videos.
  • I viewed each lesson over and over to make sure I wasn’t missing anything.

There were many couture tips shared by Susan during the making of this jacket, but these four are ones I will use again and again:

  • Sew the sides of the pocket bags in by hand with a small fell-stitch rather than sewing them by machine. What a great finish this made.
  • Catch-stitch the upper curve of the pocket bags to the underlining of the jacket. This keeps them in place and prevents sagging of the bag inside the garment.
  • Use straight-of-grain silk organza strips to stabilize the on-bias cuffs of the bias sleeves. This keeps the lower edge of the sleeve from “growing” as bias is wont to do.
  • To add a center back pleat to the lining, which is necessary of course, place the back jacket pattern piece on the fold of your lining silk, set back from the edge by about one inch. (You will not have a center back seam in your lining with this method.)  The extra inch makes a natural pleat which can be secured at the neckline and at the waist or slightly below.

It may be a little difficult to see the center back pleat, as everything is so pink, but it is in the center of the photo.

I am already looking forward to making this jacket again.  I can visualize it in a vintage Moygashel linen – it would be beautiful for Spring and Summer and Fall.  I think this jacket may become as addictive to sew as a Classic French Jacket!

 

24 Comments

Filed under bound buttonholes, Buttons - choosing the right ones, couture construction, Gussets, Linings, Uncategorized, vintage buttons, Vintage fabric, woolens

Tagged as , , , , , ,

October 13, 2019 · 9:15 pm

Completing the Pink Coat Ensemble

Although I hope to wear my pink wool coat (completed Spring of 2019) with various dresses and skirts, I particularly wanted to make a skirt which would coordinate with it.  That way I would have a “planned” ensemble.  I envisioned a petite pink-and-gray houndstooth wool, or a mini-checked pink-and-gray wool.  After a wide search and coming up empty-handed, I was just about convinced I was not going to find either of those two fabrics, at least not in the time frame I planned.  And then I found a lightweight wool and silk blend on the website of Farmhouse Fabrics.  It was a variegated gray and oyster-white plaid with a pink pinstripe running through it on the cross-grain.  Although it looked lovely on my computer screen, I wasn’t sure it would fit my needs, so I ordered a swatch.  From the swatch I could see its beautiful quality – and its perfect colors – so my search was over.

I am so accustomed to using silk organza as my underlining, but the incredible softness and delicacy of this fabric made me think twice.  I thought silk organza would undermine the fluidity of the wool/silk blend, so I decided to use a very lightweight cotton batiste instead. Using the Susan Khalje pattern for which I already had a toile (yay!), I made a very simple straight skirt.  Just for fun I decided to line it in pink silk charmeuse.  I had some in stock as I had used it for the pocket linings in my pink coat.  I also lined the waistband, which I like to do when sewing with wool.

The pink charmeuse lining is my unseen homage to this color which I love so much.

I inserted a lapped zipper by hand in the center back seam.

I angled the center back vent toward the center back seam so that it will hang evenly when I am wearing the skirt.

It is easy to see the angle on the vent with this particular fabric.

One side of the vent folded back.

When I cut out the lining for the coat, I maneuvered the pattern pieces to give me a long narrow length of the silk, which I made into a scarf.

Paired with a V-neck gray sweater, it proves to be the perfect accessory.  As Christian Dior said in The Little Dictionary of Fashion, “In many cases, a scarf gives a final touch to a dress.”

It’s a nice combination of colors!

The scarf is a pretty addition to the coat, I think.

It is rewarding to see my vision become reality!

So, now the big question, one which I have been asking myself frequently as of late, “When and where will I be wearing this lovely ensemble?”  It seems life is just so despairingly casual now, affording few opportunities to wear pretty dresses and skirts and specialty coats.  I try to buck the trend when I have the place and time to do so – and I have yet to feel like I have been overdressed.  Of course, Christian Dior had something to say about this, too. “Generally it is very bad to be overdressed, but I think that in certain circumstances it is very impolite and wrong to be underdressed.” I could not agree more and personally prefer to be slightly overdressed than underdressed.  How about you?  I do hope my pink coat, paired with this gray skirt, will prove to be the perfect dressing for many occasions.  I am certain I will enjoy wearing them.

48 Comments

Filed under Christian Dior, Coats, Fashion commentary, hand-sewn zippers, Linings, Scarves, Straight skirts, Uncategorized, underlinings

Tagged as , , , , , ,

May 22, 2019 · 1:47 pm

The Pink Coat Odyssey, The Finish!

Is it possible to fall in love with a coat?  If so, then that is what has happened with my pink coat.  It was a relationship which grew over several years.

First, I found the pattern, this Vogue Paris Original Designer Pattern from 1965.  It was an eBay purchase made several years ago, with a promise to myself that one day, when I found the right fabric, I would make it.

Next I found this silk charmeuse couture fabric on the website of Mendel Goldberg Fabrics. It was an end cut, 2.25 yards, and when I purchased it, I envisioned another wrap dress, not the lining of a coat.  Luckily I had no urgent plans to use it, and thus it eventually found its way inside the pink coat.

I am showing the lining silk here along with the pink wool to show how well they complement each other.

And then – I found the pink wool.  Also an eBay purchase, this wool was not inexpensively priced, but I recognized its rarity and its “presence” in the posted pictures.  Then I hoped it would live up to its promise once I received it and saw it in person.  Over the years I have found some amazing things on eBay, but this wool is one of the real treasures.

Because I have already posted quite a bit about the coat’s muslin/toile and certain salient details, I will not go into too much more description about the coat’s construction.  But I do want to point out some of this pattern’s engineering charms.

1) On the photo on the pattern envelope, I believe the soft shoulder of the coat is evident.  I used a “cigarette-type” sleeve heading in each shoulder to enhance the smooth transition from the shoulder to the top of the sleeve.  Not so evident on the pattern illustration is the drape of the back of the coat from the shoulder line.  I realized this drape works so well because of the two neckline darts.  They are in the neckline, not the shoulder seam; they add necessary shaping without disturbing the drape.

Can you see how the dart comes off from the neckline, not the shoulder seam?

2) The collar is an engineering marvel in my mind.  The under-collar  is constructed from four pieces, two main sections cut on the bias, and a 2-piece collar band, seamed at the center back.  The band helps the collar to turn beautifully.

This photo clearly shows the components of the under-collar. You can also see the under-stitching I did in silk buttonhole twist.

3) When I made the toile, I was concerned about the fullness of the back of the coat.  It seemed a bit much, and I have already written about my intention to add a half belt to draw in the fullness, if needed. Nope!   I am so happy with the finished look – it has that 1960s’ vibe without being overwhelming.  I did move the vertical back seam line up 1.25” to rest at my natural waistline, rather than below it.  For me, this was the correct alteration.  It may not be on someone else who has more height than I do.  Another consideration was that a half belt would have concealed the seam detailing which is so lovely on the back of the coat.

An inside look at the back of the coat, showing its drape from the shoulder seams.

The other significant alteration I made was to remove 1.5″ of width from each sleeve.  I possibly could have taken out even more, but I will be wearing this coat over sweaters and perhaps even a jacket, so the sleeves as I cut them will still accommodate that bulk.  But I would not want them any fuller!

Although the pattern did not call for it, I added flat piping to the edge of the lining.  I chose white silk crepe de chine for this contrast detail.  I felt any other color would have been too demonstrative.

The coat kind of looks like a sack of potatoes in this photo of its front edge!

The finished look of the lining edge.

I had some difficulty finding pink buttons.  I ended up with two varieties found in two Etsy shops.  I used a larger pink-swirly one for the looped closure, and smaller pink pearl-y ones for the concealed opening.  If I ever find ones I like better, that’s a easy switch.  But the more I see these, the more I like this combination.

Basting threads are still evident in this photo.

Alas, it is much too warm for wearing wool coats now, but it is ready for next Fall’s cooler days.  By then I hope to have a  windowpane checked skirt, in delicate gray, white and pink wool, specially made to wear with this coat.

It is always interesting what photos reveal. I am thinking I may need to redo the hem to get a softer look to it. It looks like it has crinkles in it!

I will take any excuse to show the inside of this coat!

I cut a piece of the selvedge with the Lesur name on it and attached it to the right front facing of the coat right below the placket.  I think this is an important part of the story of this project.

There is a very slight bow to the back of the coat, again reminiscent of the ’60s.

This coat is almost making me anxious for next Fall!

As I worked on this coat, I came to realize how perfectly suited the pattern and the wool were for each other.   It was such a privilege to spend so many hours with such quality.  No wonder I fell in love!

34 Comments

Filed under Buttons - choosing the right ones, Christian Dior, Coats, couture construction, Dressmaker coats, Linings, Mid-Century style, Uncategorized, Vintage fabric, vintage Vogue Designer patterns, vintage Vogue patterns from the 1960s, woolens

Tagged as , , , , , , , , ,

February 20, 2019 · 12:12 pm

Classic French Jacket – Number 5

Never did I imagine that when I last wrote about the progress on this jacket, it would be an entire month before I could declare it “finished.”  But such is a fact of life with the construction of one of these jackets.  They always seem to take much longer to complete than ever imagined.  (I should remind myself that during that month, I also made a wool skirt and I was away twice on short trips, but still…)

As this is the fifth one I have made, I can safely say that I have developed my own set of tips for working my way through the lengthy construction process.  Of course, it all has to start with a pattern which is a perfect fit.  Fortunately my muslin pattern is from a Jackets Class I had with Susan Khalje over five years ago. With this pattern, I can go right to my boucle and get started.

While it is often recommended to cut out just the body of the jacket, minus the sleeves (the variegated weave of which is then checked with the constructed jacket body before cutting them out), I have developed enough confidence that I cut out my sleeves along with the body of the jacket.  This allows me to make the sleeves first.  For me there are two advantages to doing this: 1) there is a psychological benefit in knowing that the sleeves are lined, linings are fell-stitched in place, trim is on, and the sleeves are as finished as they can be before setting them into the body of the jacket, and 2) I like to trim the sleeves first, as a way of testing the trim I have chosen.  If I do not like it, I only have trim on one, or two, sleeves which must be removed.  It is also much easier to sew trim on a sleeve which is still separate from the jacket.

Another tip I have learned is to use my walking foot not only for the channel quilting of the lining and fashion fabric (a must), but also for all the seams.  I pin profusely, but the walking foot helps to keep the fabric from slipping, crucial when matching all those lines and plaids prevalent in a typical boucle weave.

I chose this navy and white silk charmeuse from Britex Fabrics for my lining fabric. The boucle is from Mendel Goldberg Fabrics.

I really went round and round with the trim for this jacket.  I knew I wanted to use self-fringe, but I also knew it would need some definition added to it.  After trying several colors of velvet and Petersham ribbon in the trough of the fringe, I realized I would have to go to a bright orange as an underlay for the navy twisted braid I wanted to place on top.

The trim was applied in three steps. Here the fringe is attached as the first step. Not too exciting all by itself.

The next step was to apply this bright orange velvet ribbon, also from Britex. It was really a leap of faith to use this very demonstrative color. It looks fairly garish like this! (I sewed each edge of this ribbon separately, so twice around for this part of the trim.)

But once the navy twisted braid is on, step number three, that bright orange underlay is fine.

One thing I have done with all my jackets – and this is a tip from Susan Khalje – is to add about 1/2 inch in length to the center back of the jacket, curving it up gently to the side seams. I love the effect that this little bit of extra curve gives to the back of the jacket.

I always wax and iron the thread which I use for applying the trim.  It adds strength, but also is easier with which to work.  For this jacket, I also carefully ironed each “level” of trim as I applied it.

A detail of the right pocket. Of course, and this is preaching to the choir, the pockets absolutely cannot be cut out until the body of the jacket is completed. Their placement is a visual determination which really depends upon the fit and appearance of the finished jacket.

I found these vintage buttons in one of my button boxes.  I knew I wanted to use dark blue buttons, and I kind of liked the appearance of these.

The only hesitation I had is that they are plastic!  It seems a bit of a sacrilege to put plastic buttons on one of these jackets, but I actually think they look okay.  If I find other navy blue buttons in my future travels, I might switch them at some point.  But right now, they work.

Because I had only 8 buttons, I was limited to two pockets, and three buttons on each sleeve. I probably would not have put four pockets on this jacket anyway, so that was not really a compromise.

I have enough of the boucle left over to make a simple straight skirt, I think.  However, that will not happen this year!  I am so ready to move on to my next project.  In fact, it may be well over a year before I plunge into another one of these jackets.  I have but one other boucle lurking about in my fabric closet right now, and I am content to let it stay there for a while.

It was much too cold for outdoor pictures, so these will have to do!

I like the jacket worn closed …

… or open.

The curve of the back hem is apparent here.

Now it’s time to tiptoe ever so quietly into the lighter shades and fabrics of early Spring, despite the snow that is currently falling. I am so happy to have this jacket in the “finished” column.

40 Comments

Filed under Boucle for French style jackets, Buttons - choosing the right ones, Chanel-type jackets, classic French jacket, couture construction, Linings, Uncategorized, vintage buttons

Tagged as , , , , , , ,

September 9, 2018 · 6:39 pm

A Definite ‘60’s Vibe

“Unexpected,” “unusual,” “fascinating,” and even “a bit magical” are words used to describe some of the fabrics, prints and designs from the late ’60s/early ’70s (The Editor’s Letter, Vogue Pattern Book International, April/ May 1970.)  Although I have no documentation, I am sure that this red and white Moygashel linen is from those last years of the 1960s or early years of the ’70s.

Of course, another clue to the age of this Moygashel linen is its width of 45″. Prior to about 1964, Moygashel was only available in 35 or 36″ width, as best as I can determine.

A quick look through some of my Vogue Pattern Book Magazines from this time period uncovered other fabric designs which have a similar feel to them.

This dress appeared in the April/May 1970 Vogue Pattern Book International, page 16.

 

This large, irregular leaf print was shown in the February/March 1968 issue of Vogue Pattern Book International, page 11.

 

Even this sewing machine ad features a dress with an abstract geometric fabric design. Again, this is from the February/March 1968 Vogue Pattern Book International, page 24.

 

And here is another spectacular Moygashel linen, advertised in the April/May 1970 Vogue Pattern Book International, page XXIV. Cute dresses!

Interestingly enough, these demonstrative and colorful fabric designs were often sewn from the same or similar patterns as their more demure pastel and solid counterparts. I kept that in mind as I contemplated which pattern to use for this “unusual” and “fascinating” linen. Additionally, I wanted to pair it with a red linen belt  (which I ordered several years ago when I knew that Pat Mahoney was closing her custom belt and button business.  The red linen is some I fortuitously had left over from some of my sewing in the early 1970s.)

Then, after the recent success of my fairly dramatic changes to this pattern – and knowing I had a great muslin from which to work – I went with it again.

Here is the result:

I definitely had some issues with the very uneven grid.  I took a lot of pictures of the fabric arranged on my dress form before I started to lay out the pattern.  This helped me to visualize the areas which needed some regularity (if you can call it that!)  I realized quickly, in order to achieve a semblance of matching in the critical areas, I would have to accept way less than perfect in other areas.  Because the entire geometric design is so irregular, I have, I think, made peace with this decision.  (I haven’t worn the dress yet, so the proof of this is still to be determined.)

The bodice front seemed to me to be the most critical, and I wanted that three-striped horizontal motif to follow across the upper bustline.

 

The back proved to be a bit more problematic, as three quarters of it lined up fairly well, with one section off on the left side.  Because the side piece wraps around the side (as in no side seam), there was only so much I could do in order to be able to “match” the front.  Additionally, I thought it was more important to have the back center seam, rather than the side back seam, positioned correctly, so that’s what I did.

Am I going to have the nerve to wear this dress?

I may end up loving it??

I lined the entire dress with a very lightweight linen cotton blend, eliminated facings for the neck and armholes, and finished those areas with a typical couture treatment.

Because the skirt lining is unattached, I finished off the seams of the linen with Hug Snug rayon tape.

I did not use a silk organza underlining, as I like my linen dresses to be washable. Without that inner layer of organza, I had to be very careful with sewing the hem, to try to make it as unnoticeable as possible.

I doubt I will have a chance to wear this dress yet this Fall.  The later it gets, the odder it will look.  That’s okay.  I’m ready to move on to something more subdued – but hopefully “a bit magical” will still be in the equation.

32 Comments

Filed under couture construction, Linen, Linings, Mid-Century style, Moygashel linen, Uncategorized, Vintage fabric, vintage Vogue Designer patterns

Tagged as , , , , ,

July 23, 2018 · 5:55 pm

Wearing Dots

From this …


To this…


How did that happen?

After my purchase of that pattern a couple of years ago, I definitely had second thoughts.  While I loved it when it was first available back in the 1970s – and at that time I was of the age when I probably could have actually worn it – I immediately realized it would not be appropriate for a 60-something-year-old! I tucked it away in my pattern file where I knew I would come across it occasionally and indulge a long-ago dream.  Little did I know it would play a major roll in the realization of this polka-dotted dress.

It took almost eight years for me to come up with a plan for this polka dot silk fabric.  I kept envisioning a waisted, sleeveless dress with a “flowy” skirt, but I could not find a pattern I liked, either vintage or new.  I wanted to avoid darts as much as possible (that’s a story in itself for someday), which meant I needed a princess style bodice.  Many princess line bodices have side seams, but I wanted one without side seams, and with princess line seaming on the bodice back as well.  Pondering all this, I again came across my Belinda Bellville pattern above and thought maybe it would work, with a few changes. But then I noticed that the bodice was supposed to be cut on the bias. 

This pattern detailing from the instruction sheet shows the thee bodice pieces at the top of the picture. The bias is clearly marked.

After not having any success in finding any other suitable pattern, I gave it another look.  Why not cut it on the straight of goods?  It was at least worth a try in muslin, so that’s what I did.  The changes I made to it included; 1) lowering the bust line, 2) eliminating the short-waisted front of the dress and restoring it to waist level, 3) placing the front center part of the bodice on the fold, eliminating the center seam, 4) lowering the neckline just a little, 5) making the waist larger, and 6) adding some ease across the back and shoulders.  With all those changes, I had a bodice I really liked.

But then I needed to make a skirt to complement the bodice.  When I looked at the skirt pattern, I knew I needed to divide it in thirds (for one half of the width of the skirt) and match the seam lines to the seams in the bodice.  Here is what I came up with:

On the left is the one-piece tissue pattern for the skirt. Using the dart lines on that pattern helped me determine the angles I needed for my skirt.

It was about this time I got the idea to make this dress in a longer skirt rather than knee-length, which is where I usually wear my dresses.  The only question I had was – did I have enough fabric to do this?  My silk was 45” wide, and I only had two yards.  I spent at least an hour laying out and eyeballing my muslin pieces on the silk, on the floor, just to see if I could possibly accomplish this task.  I found one combination that would allow this, and took a photo so I could remember how to do it!

It literally took an entire week to work out the pattern and perfect the muslin, but then the sewing began!

As soon as I completed the construction of the bodice, including its silk organza underlining, its catch-stitched raw seam edges, with the seam allowances around the neckline and armholes appropriately tacked in place, I knew I had a bodice which was just what I had envisioned.

Somehow the skirt seams all matched up perfectly with the bodice seams and the center front inverted box pleat, which I added, looked wonderful, I thought.  I made the lining out of navy blue crepe de chine, purchased from Emma One Sock Fabrics.

When it came to under-stitching the neckline and armholes, I decided to do it in white.  It mimics the white polka dots in the fashion fabric and also was much easier to see while doing all that handwork.

Instead of a box pleat in the lining, I did two side pleats to reduce bulk in that critical tummy region!

Fortunately, for the belt, I had silk taffeta left over from two previous projects, which turned out to be a perfect match.  I did not want the belt to take away visually from the rest of the dress, so I made it a modest 1.5 inches wide.  I think it is enough to complete the look, but not overpower it. And OF COURSE I wanted to finish it off with a tailored bow.  (I am planning a post on making this tailored bow belt, so I will not go into the details of it right now.)

 

An oyster-colored clutch helps to complete the look.

This is a very comfortable dress to wear!

No attempt was made to match any dots, as the pattern was completely random. This is the hand-picked zipper. I love the fact that the navy thread shows up on the white and coral dots.

And should I need a dress coat, this one matches the belt!

While this dress was firmly in my queue for summer sewing, at the time I did my planning I was not making it for any special occasion.  However, as good fortune would have it, two unforeseen occasions are now approaching in late summer for which this dress will be perfect.  I am definitely looking forward to wearing these dots!

41 Comments

Filed under Bows as design feature, Cocktail dresses, couture construction, Linings, Mid-Century style, Polka dots, sewing in silk, silk, Silk taffeta, Uncategorized, vintage Vogue Designer patterns, vintage Vogue patterns from the 1970s

Tagged as , , , , , , , ,

April 5, 2018 · 6:49 pm

The Never-Ending Winter

One advantage to this never-ending Winter we are having in the Northeastern part of the United States is the focus – and extra time – it has given me in finishing my Winter projects. After completing my recent Classic French Jacket, I did some “birthday dress” sewing for my granddaughters (still to be shared) and made two baby gifts, and only then did I come back to making a matching sheath dress for that jacket.

I had thought long about how this dress should be constructed, and not having the advantage of taking a class in such a project, I knew I would have to figure it out on my own. I decided I would combine classic couture construction with the techniques used for making a classic French jacket.

First, I underlined the three pieces of the dress (front and two back panels) with black silk organza, and I anchored all the darts with a catch-stitch. (I always go back to that sound advice from Susan Khalje – couture is about control – and I know how this extra step helps to keep everything in its rightful place.)

Then I machine quilted the two back panels and the dress front just as I would quilt the separate pieces of a French jacket. I ended the quilting about two inches from the tops and bottoms of the pieces and tied off each line of quilting inside between the two layers. I figured the quilting did not need to be as closely placed as it is with a French jacket, so my quilting lines are about 2 inches apart. This following photo shows the quilted channels on the inside (they are virtually invisible on the fashion fabric):

The three pieces were sewn together as a Jacket would be sewn with the edges of the lining loose and then finished by hand with a fell stitch. At this point I felt fairly confident that the dress was going together as I had hoped. And yes, there is a lot of handwork involved! Next I inserted the long back zipper by hand and then finished the neckline and lining with a fell stitch.

Because I wanted to apply a length of trim above the bust – to match the trim placement on my jacket – I did the armholes last, as the trim needed to be attached before they were finished.

 

Finally, the hem. The length had to be precise, as there will be no lengthening nor shortening of this baby! The final step was to sew the hemline trim on by hand. I delineated the back vent with the trim to give it some extra interest. Also, although it is not visible here, I angled the edges of the vent slightly to the inside so that when the dress is on, the vent will not gape, but rather hang straight. This is another one of those lovely couture tricks I learned from Susan Khalje!

I must say this dress is a dream to wear, with that quilted silk interior.

And – I am quite happy with how it looks with my jacket.

Br-r-r-r-r!

As warm as this dress and jacket are, I was freezing when these photos were taken!

I have faith that Old Man Winter – who is truly ancient by now – will soon leave us, but not without a fond farewell from Fifty Dresses who appreciated his extra encouragement on seasonal sewing!

 

43 Comments

Filed under Boucle for French style jackets, classic French jacket, couture construction, Linings, Sheath dresses, Suit dresses, Uncategorized

Tagged as , , , , , ,

March 1, 2018 · 2:26 pm

Classic French Jacket – Number Four

Many of you, no doubt, are familiar with the “10,000 hour” theory. In a nutshell, it purports that to master something, artistically or technically, you must devote at least 10,000 hours to that endeavor (assuming you have a proclivity for it in the first place.) Well, cognitively I know I have a long way to go towards having 10,000 hours devoted to these Classic French Jackets, but it sure seems like I just devoted at least half of those hours to my current, just-finished jacket!

That said, I was aware of an interesting phenomenon as I plugged away on this project. I felt more confident in the process on this one – and more confident in my ability to execute it well. I noticed this especially when I got to the point of inserting the sleeves. The sleeves are, as many of you know, inserted entirely by hand. In previous jackets this has always been my least favorite part. For one thing, you are working within the confined area of the armhole, with lots of very wide seam allowances and “flapping” fabric. It is messy, but precision is necessary to get a beautiful shoulder line and a sleeve that fits well and feels comfortable.   This time it did not feel like an imperfect process; I actually felt like I knew what I was doing!

Getting ready to insert one sleeve.

Voila! It’s in.

Perhaps another of the clues to my feeling more confident in the process of this jacket is the fact that I felt I could take it in a little bit of a new direction. The most obvious departure from the norm is the fact that it has no buttons. Having seen some of the real Chanel jackets in my Pinterest feed that are embellished with bows instead of buttons, gave me the idea to change up this jacket. I really like bows, and I thought using bows would be the perfect foil to this rather regular, non-whimsical hounds-tooth boucle.

I also decided I would eliminate the sleeve extensions and go for curved hems, set off by the trim alone – no bows even for this professed lover of them, as I thought that would be just too much.

Before the trim is applied.

Here is what it looks like on the inside.

Another guiding principle I used for the embellishment of this jacket is the fact that I am planning a matching sheath dress for it. Obviously I want the two pieces to complement each other beyond the shared fabric, so the dress will be trimmed in a manner coordinating with the jacket. (These details will be shared in a future post when I have the dress underway. Eternally optimistic here!) Anyway, envisioning the jacket and dress worn together led me to add both the waistline trim and the trim above the bust (which is across the front only.)

First some details on the waistline trim: I set the pockets to follow this line; the trim is continuous across the top of the pockets (which pick up the curved hems of the sleeves.) I gradually dipped the back edge of the jacket by ½ inch in the center back (a couture technique I picked up from Susan Khalje) and had the waistline trim follow that contour, which I think adds a very graceful look.

I sewed the pocket linings by machine, as that gave the curved dip a better turn. I sewed first along the stitching lines and then cut the curve.

The slightly curved back of the jacket.

Second, I decided I needed the trim across the upper bust as an anchor for the bow I had planned. Obviously I had to set this trim in place before I inserted the sleeves.

The left sleeve pinned in place, the trim already applied.

It was a difficult decision for me to forego a printed lining for this jacket, but I am so glad I did. The black charmeuse has been tiring to work on for my blurry eyes, but it just seems right in this application. And just think – now I have an entire dress to concoct using more black lining!

The boucle is from Mendel Goldberg Fabrics; the trim is from Britex Fabrics, and the black silk charmeuse lining is from Emma One Sock Fabrics.

Until the matching dress is finished, a black sweater and black skirt will have to do.

A red handbag is just what this rather dark and dreary day needs.

I will definitely be ready for some bright Spring colors when this entire ensemble is finished.

46 Comments

Filed under Boucle for French style jackets, Bows as design feature, Chanel-type jackets, classic French jacket, couture construction, Linings

Tagged as , , , , , , ,